Shuliy Machinery’s PET bottle washing line is a complete solution for recycling PET bottles. Through a series of state-of-the-art shredding, washing, and drying equipment, PET bottles are finally processed into contamination-free PET flakes. Our standard PET bottle recycling line has a capacity of 500kg/h-6000kg/h, and we can customize the line equipment configuration and capacity according to your needs.

If you want to start a PET bottle recycling business, investing in the PET bottle recycling machine is a good choice, our PET bottle recycling plant has been exported to Nigeria, Mozambique, Congo, Saudi Arabia, and other countries.

PET plastic recycling machine

Introduction of PET Bottle Recycling Line

The main equipment of this PET bottle recycling plant includes a PET bottle label remover, plastic bottle shredder machine, plastic float sink tank, hot washing tank, plastic friction washer, and horizontal dryer. To ensure the quality of the final PET flakes, you choose multiple washing steps.

This PET bottle washing line is mainly used for washing and recycling plastic bottles made of PET such as mineral water bottles, beverage bottles, milk bottles, and so on. These bottle flakes can be further used for reproduction or pelletizing, which are widely used in the plastics manufacturing industry. Our plastic bottle scrap machines are suitable for enterprises of all sizes and can be customized according to the specific needs of customers to ensure the efficient operation and high-quality output of the production line.

Advantages of PET Bottle Recycling Machine

  • High-efficiency cleaning ability: Ensure that the surface and internal impurities of PET bottles are thoroughly removed to enhance the quality of recycled bottle flakes.
  • Flexible configuration: The PET bottle washing line can be customized according to the customer’s specific needs, production volume, and plant layout to provide the best solution.
  • Quality requirements: Ensure that the dryness, pH value, characteristic viscosity, PVC content, etc. of the final PET bottle flakes produced meet the standards.

Raw Material and Final Products of PET Bottle Washing Line

The raw material of PET bottle recycling plants is all kinds of waste PET bottles, such as mineral water bottles, beverage bottles, juice bottles, milk bottles, beer bottles, etc. The final product is recycled PET bottle flakes.

The quality of recycled PET bottle flakes can be classified by color, from high to low, as pure white flakes, light blue flakes, green flakes, yellow flakes, and miscellaneous flakes. For recyclers, high-quality bottle flakes after strict classification and cleaning can meet the demand of the higher-end market and enhance the value of products.

Learn more: Factors Affecting The Fluctuation Of Recycled PET Bottle Flake Recycling Price

Working Video of PET Bottle Recycling Plant

This video shows the process of recycling PET bottles into clean PET flakes.

Recycling Steps of PET Flakes Washing Line

The PET flakes washing line workflow typically includes the following key steps.

  • Collecting PET bottles: First, collect discarded PET bottles from different sources such as recycling stations, supermarkets, restaurants, and households.
  • Unpacking: Plastic bottles collected from rubbish dumps usually need to be unpacked first.
  • Crushing: The sorted PET bottles are fed into the plastic bottle shredder machine to cut them into flakes to reduce their size.
  • Cleaning: Washing PET bottle chips to remove surface dirt, grease, and labeling. This can include multiple washing stages to ensure that the bottle flakes become clean.
  • Drying: Drying the washed PET pellets to remove any remaining moisture and ensure that they meet quality standards.
PET washing line
PET bottle washing line flow picture

3D Video Of PET Bottle Washing Line

The video shows a 1000kg/h PET bottle recycling process. Our PET bottle recycling machines are available in a wide range of outputs to meet the requirements of most recyclers.

3D video of PET bottle recycling process

Main PET Bottle Recycling Machine

PET bottle label remover machine

PET bottle label remover: The first step of the PET bottle recycling line is usually to remove PVC labels. PET bottle label remover can detach the labels effectively, the de-labeling rate is up to 98%, with a high degree of automation, instead of removing labels manually.

plastic bottle shredder

Plastic bottle shredder machine: The machine is used to crush plastic bottles into bottle flakes for subsequent washing as well as recycling. The plastic bottle shredder machine’s blade material is 9Crsi for a long life.

sink float separation tank

Plastic float sink tank: This equipment is used to separate PET bottle flakes from caps or labels. When in use the PET bottle flakes will sink and be transported to the next step through a screw at the bottom, while the labels or caps will float on the water surface.

PET bottle flakes hot washing machine

Hot washing tank: Hot wash tanks clean PET bottle flakes through high-temperature water with chemical detergents. It is more effective than cold washing, it can effectively remove the presence or absence as well as residual adhesive, etc.

PET friction washing machine

Plastic friction washer: Inside the machine, there are multiple rubbing plates and rubbing strips to wash out the detergent brought out of the hot wash tank and lower the pH level.

horizontal dryer

Horizontal dryer: The machine can remove 98% of the water in PET bottle flakes, and with the drying tube at the back, the water can be controlled at 0.5-1%.

1000kg/h PET Bottle Recycling Line Parameters

Below is the information about the parameters of some machines of PET bottle recycling plant, we also have many models and various outputs of machines. If you need it, please leave your information in the form on our website, and we will send you the machine details immediately.

ItemSpecificationsQty
PET bottle label removerVoltage: 380V, 50HZ, 3-phase electric
Power: 15+3+1.5kw
Barrel length: 4.3m, diameter: 0.63m
Round bottle off-label rate 98%
PVC content/(mg/kg) ≤ 100-300 (mg/kg)
1
Plastic bottle shredder machineVoltage: 380V, 50HZ, 3-phase electric
Power: 37+1.5KW+1.5kw
Tool: 9Crsi
Production: 1000KG/H
Screen size: 18mm
Knife plate thickness: 40mm
1
Plastic float sink tankVoltage: 380V, 50HZ, 3-phase electric
Power: 3KW
Outer wall thickness: 4mm
Blade thickness: 6mm
Equipment size: 5000 * 1000 * 1000mm
3
Hot washing tankVoltage: 380V, 50HZ, 3-phase electric
Motor 4kw
Electromagnetic heating power: 80KW
Height: 2000mm, diameter: 1300mm
2
Friction washing machineVoltage: 380V, 50HZ, 3-phase electric
Power: 7.5KW
Barrel length: 3000mm, diameter: 400mm
Blade thickness: 6mm
2
Plastic dewatering machineVoltage: 380V, 50HZ, 3-phase electric
Power: 15KW
Remove moisture and achieve a drying degree of around 95-98%
1
Drying pipesVoltage:380V,50HZ,3phase electricity
Diameter 159mm, length 15m
Heating power 30kw, heating with moisture 0.5%
Motor 7.5+3kw
Contact material part 304 stainless steel
Moisture(%)≤0.5-1%
1
Wind separatorVoltage: 380V,50HZ,3 phase electricity
Diameter 0.8m, height 4.5m;
Motor 2.2kw3 Auxiliary fan: 0.753
Elevator motor 3kw
For removing residual fine trademark and dust
Impurity content/(mg/kg)≤300-500
Powder content/(mg/kg)≤2000-3000
1

Above are the detailed parameters of the main equipment of the 1000kg/h PET bottle washing line. Among them, the drying duct and air separator are suitable for scenarios with large output and high-quality requirements for PET bottle flakes.

PET Bottle Washing Line Successful Cases

Customized PET Plastic Recycling Machine Shipped To Nigeria

Our customized PET plastic recycling machine has been successfully shipped to Nigeria and we will continue to monitor the performance of the machine at the Nigerian plant.

For more details, please check out: PET Bottle Flake Washing Line Has Been Shipped To Nigeria

PET Flakes Washing Line Sent to Congo

A customer from Congo has purchased a complete PET flakes washing line from Shuliy Machinery, which is now in operation locally.

For more details, please check out: PET Bottle Washing Plant Exported To Congo

PET Bottle Recycling Plant Shipped To Mozambique

Previously, a customer from Mozambique customized a PET bottle recycling plant at Shuliy Machinery, here is the delivery video.

For more details, please check out: PET Bottle Recycling Line Exported To Mozambique

Best PET Bottle Washing Line Manufacturer

Are you looking for the best PET bottle washing line manufacturer? We are committed to providing high-quality pet bottle recycling machine suppliers to meet your needs. Our products meet industry standards and provide reliable solutions for plastic bottle recycling. If you are looking for a trusted manufacturer, we will be happy to provide you with professional services.